|
|
Neon, nothing wrong with what you have done so just carry on as you are with the other side. As long as you are above the stern deck level you will be fine, this all gets cut down when you come to measuring and marking out for the gun ports.
Hope this helps.
Regards
Alan
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
I love you lol......jesus best news of the week
|
|
|
As Alan says it will be no problem just go with the flow happy building rgd Martyn Building ? Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa Next Build ? When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
Cheers martyn was really worried for a while.
|
|
|
Hi Neon, looking at your build again it looks as if you are still a little low from the stern deck line... I would add another 50mm strip so you are above the deck line, this will be trimmed down later. If you have to, add a temporary bracing strip on the inside to hold your last strip in place..... .. Other than that you are doing great.... Hope this helps.. Regards Alan
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
cheers Alan. ...will do that so. What grade sand paper would you recommend for sanding the hull.Looks like a tough job.
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
Well lads at just over a years work I finally finished the hull today. I never thought so much work went into a build like this. This is my first build and I am more then happy with how this end of it turned out. I have done most of the heavy sanding and have rubbed over with some fine paper. My hand is falling off now so will give it another lash tomorrow. Although the picture may not show it, it is very smooth. Is it necessary to rub all the fillers out or is it ok to leave it as a finish ?
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
neon attached the following image(s):
|
|
|
Hi Neon, looks first class to me, very well done.... .. Wouldn't worry too much about the filler, all you are after is a very smooth hull ensuring you have filled or rubbed down all the dips and bumps. Once you are happy you will find everything is covered up by the second layer of planking.. .. Looking at what you have produced so far I don't think you should have too many problems applying the second layer plus you can always refer to the other builds for guidance and inspiration..... Good luck and look forward to seeing your progress... Regards Alan
|
|
|
Hi Neon as long as the hull is smooth with no high or low spots it will be fine to leave the filler as the 2nd planking will cover it Happy building rgd Martyn Building ? Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa Next Build ? When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
Hi lads just finishing cutting the gun ports on one side of the hull. I must say I found this very tricky to do. I am reasonably happy with the outcome.
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
neon attached the following image(s):
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
Go easy on me lads I am very brittle after all this work. If course positive criticism is more then welcome or any pointers for where I have gone wrong.
|
|
|
Hi Neon She looks good to me, nice job Andy Current builds:-C57,Zero, Lamborghini Countach, Caldercraft HMS Agamemnon,Robi,R2-D2, MFH Cobra .
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
|
|
Rank: Administration Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,191 Points: 23,661 Location: East midlands
|
Hi Neon, I concur, it looks good from here too. Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
|
|
|
Nice work neon looks good to me Rgd Martyn Building ? Completed. Soliei Royal . Sovereign of the Seas . Virginia . Scotland . San Felipe . Corel vasa , Santisima Trinadad X section , Vasa Next Build ? When sailors have good wine, They think themselves in heaven for the time. John Baltharpe
|
|
Rank: Pro Groups: Registered
Joined: 05/09/2012 Posts: 184 Points: 525 Location: ireland
|
THANKS martyn much appreciated.
|
|
Rank: Vice-Master Groups: Registered
Joined: 17/11/2012 Posts: 863 Points: 2,608 Location: Gohfeld (Germany)
|
Hi Neon! Well done, go on this way ! Regards, Bernd
|
|
Guest
|