Welcome Guest Search | Active Topics | Log In | Register

9 Pages «<6789>
Marcel's Build: Sovereign of the Seas from De AGOSTINI (Agent: Jacklin Enterprise) Options
Marcel
#141 Posted : 14 February 2014 09:08:41

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
Issue 35
Measurements again

Step 13: The port at rib 16 was increased from 15mm to 20mm to get the port more centre as advised by Tommick in the official build.

Step 14 shows the port between rib 26 & 30 to be 7mm from rib 26. I reduced it from 7mm to 5mm to get it centre. The original measurements will cause the port to be cut 1mm into part 49 (Issue 16). I have now 1mm clearance between both the ribs.
Marcel attached the following image(s):
Gunport new.jpg
-15mm - 20mm.jpg
part 46.jpg
Photo0072.jpg
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Gandale
#142 Posted : 14 February 2014 23:06:50

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Global Forum Support, Moderator, Official Builds, Administrators

Joined: 08/09/2012
Posts: 15,172
Points: 46,151
Location: Aberdeen
Hi Marcel, there is a lot of measuring to do so just double check everything.... Good luck on cutting those ports out, I found it a very time consuming process but so worthwhile...... Cool Cool

Regards

Alan
ian smith
#143 Posted : 18 March 2014 17:24:33

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 16/08/2010
Posts: 2,771
Points: 8,344
Location: Brighton
Hi Marcel.
Looking Very nice. Good luck with the gun ports. Look forward to seeing the end rusult. IanCool BigGrin
Current builds.Hachettes build the bismark,HMS Victory, HMS Hood.
Finished Builds Corel HMS Victory cross section.
Marcel
#144 Posted : 28 April 2014 07:41:46

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
Cool
Thanks Alan and Ian for looking in. I was waiting for the deck plates and other parts to continue planking.

Blink
I use the decks to proper align the upright ribs before fixing the strakes into a permanent position. The plates also indicates that my gun ports sits' perfect in line with my measurements of the ports.
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Marcel
#145 Posted : 28 April 2014 07:51:12

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
In the mean time, I did some odd work on my build. Instead of bamboo, I used walnut to cover the front piece at the bow. I made it as a removable part for future work still to be done.

Although it would not be visible, I had dismissed of the supplied part and planked the floor directly onto the bow.
Marcel attached the following image(s):
Photo0081.jpg
Photo0083.jpg
Photo0084.jpg
Photo0085.jpg
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Gandale
#146 Posted : 03 May 2014 01:18:55

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Global Forum Support, Moderator, Official Builds, Administrators

Joined: 08/09/2012
Posts: 15,172
Points: 46,151
Location: Aberdeen
Hi Marcel, coming along very nicely..... love the walnut facing.....Cool Cool .. Look forward to seeing more of your build.....Cool Cool

Regards

Alan
Garth
#147 Posted : 07 May 2014 19:41:27

Rank: Master

Active Service Medal: 500 post active service MedalTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourOutstanding Build: An award for an outstanding build
Groups: Registered

Joined: 29/03/2011
Posts: 1,053
Points: 3,165
Location: Glenvista JHB
Hi Marcel,
Build looking great. Well done with the walnut overlay - a nice touch.
Kind regards,
Garth
"Measure twice, cut once!!!"
Finished!!! HMS Victory,
Current build: Black Pearl.
On hold: Bismarck, Golden Hind, Flying Scotsman, Victory Cross Section, SOTS, Tiger 1.
Wish list: USS Constitution.
Marcel
#148 Posted : 17 May 2014 12:45:46

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
Thanks for looking in at my build. I got this idea from Martyn's build
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
karl1113
#149 Posted : 17 May 2014 21:12:43

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 04/04/2010
Posts: 3,955
Points: 11,809
Location: uk
nice work marcelCool
Current builds: SotS, USS Consitution, San Felipe, D51 loco, HMS Surprise, RB7, Arab Dhow, Jotika HMS Victory
Completed builds: HMS Pickel, Thermopylae, Mississipi river boat, Mary Rose, Cutty Sark, San Francisco II, HMS Victory x5, Titanic Lifeboat, Panart HMS Victory Launch, Hachette Titanic, Virginia Schooner, Endeavour Longboat.

http://www.model-space.com/gb/
stevie_o
#150 Posted : 17 May 2014 21:47:08

Rank: Super-Elite

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 30/01/2013
Posts: 4,604
Points: 13,607
Location: Monmouthshire UK
cruorangelussilicis
#151 Posted : 18 May 2014 11:57:14

Rank: Pro
Build-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 17/02/2014
Posts: 124
Points: 376
Location: Wales, UK
Fantastic build log, am really enjoying seeing your progress.
Marcel
#152 Posted : 20 May 2014 16:59:30

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
karl1113 wrote:
nice work marcelCool


Thanks Karl, I get most of my ideas from the forum.
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Marcel
#153 Posted : 20 May 2014 17:07:51

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
stevie_o wrote:
Coming on nicely Marcel, like the walnut planksBigGrin
Steve


Hi Stevie, thanks for the nice comment. I want to move away from the general painted version and find the walnut a great alternative and goes well with the Sapele strips. I am still in the dark what to use for the gun port-linings.
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Marcel
#154 Posted : 20 May 2014 17:33:17

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
cruorangelussilicis wrote:
Fantastic build log, am really enjoying seeing your progress.


Hi Mike, thanks for looking in. I admit the Victory-build is a notch too high at this stage of my novice skills and shall give it a pass.

Progress is slow due to the needed parts being stretch out in different issues. I am still waiting for deck plates and poop-deck parts before I can cut the gun ports. I have discovered that some of my initial measurements is slightly off when I compare it with the mating parts. A small supplied part is out of specs and I end up making it myself.

"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
claret
#155 Posted : 21 May 2014 08:58:19

Rank: Vice-Master
Active Service Medal: 500 post active service MedalBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 02/09/2012
Posts: 515
Points: 1,515
Location: Burnley
Hi Marcel,

Looking very nice indeed.

Regards
Claret
Also working on:
SOTS.
Moebius 1/32 Flying Sub with PE & lights.

Waiting in the wings:
Polarlights Spindrift from Land of the Giants.

finished:
007 Iconic DB5.
Hans
#156 Posted : 24 June 2014 13:23:16

Rank: Master

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 30/03/2011
Posts: 1,344
Points: 4,079
Location: Bryanston, Johannesburg. RSA
Lovely job there Marcel, that walnut looks great.
Rgds, Hans
"It's okay to make mistakes. mistakes are our teachers - they help us to to learn, even if it is painfully"
Current Build:
Endeavour Cross section,D51
Completed: HMS Victory
Under the bench: Endeavour x 2,Sovereign of the Seas, Akagi and The Black Pearl!HMS Victory Cross Section
Marcel
#157 Posted : 24 June 2014 14:05:41

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa


Thanks Claret and Hans for your comments. I waited very long for issue 44 to arrive due to some management problems from my supplier. It has arrived a few days ago and I was exited to unpack my build again.

I dry fit the 3rd deck plates and discover I made a booboo at rib 26 by gluing it skew onto the bulk. It is an easy fix for me. I cut off the guilty rib section level with the 2nd deck plate, break it free from the bamboo planking, then glued it back into place again. I had to re-do the last top 3 strakes to correct the profile of the planking.

I am disappointed to find out I have to wait 6 months before they will send me the quarterdeck parts contained in #Issue 68. This is needed to get the correct profile at the Captain's Quarters.
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Marcel
#158 Posted : 22 December 2014 06:27:33

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
Cool Summer has arrived and so has many more issues of the SOTS. The last of the deck plates finally made its appearance.

I manage to rectify the profile of the AFT- castle so that the plates can fit proper. I had to break down many strakes of bamboo to achieve my goal. I decided its best to complete all the floors before sanding and cutting. This will give me a better base to calculate measurements accurate.

When I laid the support beams, I used bamboo skewer-sticks as upright supports.
Marcel attached the following image(s):
Photo0221.jpg
Photo0220.jpg
Photo0219.jpg
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Gandale
#159 Posted : 23 December 2014 01:11:11

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Global Forum Support, Moderator, Official Builds, Administrators

Joined: 08/09/2012
Posts: 15,172
Points: 46,151
Location: Aberdeen
Nice to see you back on the build Marcel, coming along very nicely.....Cool Cool .. Hope to see more soon....

Regards

Alan
Marcel
#160 Posted : 24 December 2014 08:25:26

Rank: Pro

Turquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 16/06/2013
Posts: 284
Points: 859
Location: Cape Town, South Africa
Gandale wrote:
Nice to see you back on the build Marcel, coming along very nicely.....Cool Cool .. Hope to see more soon....

Regards

Alan


Thanks Alan, Yes , I'm back on the SOTS. I am also busy building a smaller ship form the 18th century as a gift for a friend of mine.

I had to wait for the decks to continue. The front upper deck was out of line and the deck plate did not align at all.
"Rather try and fail than had failed to try".


Sovereign of the Seas

Model Space forum: Marcel's build
Users browsing this topic
Guest
9 Pages «<6789>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.543 seconds.
DeAgostini