|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Thanks Alan. This may seem a silly question, however I will be planking the deck shortly and I was wondering how many planks to put on at a time? I was thinking of putting the centre plank first, then when dry one on either side, two planks at a time working out, would that be ok?
regards Martin.
|
|
|
OldMart wrote:Thanks Alan. This may seem a silly question, however I will be planking the deck shortly and I was wondering how many planks to put on at a time? I was thinking of putting the centre plank first, then when dry one on either side, two planks at a time working out, would that be ok?
regards Martin. Hi Martin, on this forum there isn't a question that is silly, we're here to help all modellers wherever possible.... Asking questions is how we all learn.... With planking the deck, if you are using PVA then you only need to apply a thin layer to get a good hold. Once the plank is in position you only need to leave it for around 10mins to allow the PVA to get a good grip, then you're ready to fit the next plank. If you are planking either side of the centre plank as you suggest then your waiting time for the PVA to grip should be minimal..... Regards Alan
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Alan. Thanks very much,
Kind regards Martin.
|
|
Rank: Super-Elite Groups: Registered
Joined: 08/03/2014 Posts: 2,970 Points: 8,502 Location: united kingdom
|
Hi Martin when I did mine I cut my planks to 70mm which gave me 7 to a length and I cut 2 lengths at a time giving me 14 planks which I glued either side of the central plank, so I stuck 14 planks at a time with each application of glue. Ken's the name modeling's the game.
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Ken. Thanks for that a good idea, I was afraid of putting too many planks on in one go in case they buckled!
Martin.
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Hi Everybody. An update and word of warning for beginners like myself! After a bit of a false start through on thing and another. I dove in and started to plank the decks, when I had almost finished, to my horror I realised that in my haste I had not put on the waterways. So looking at the mess I had made, I have ordered some new planks and I will be stripping off what I have done. A lesson I have learned. "Read the instructions proper and then read them again before doing anything. Martin.
|
|
Rank: Super-Elite Groups: Registered
Joined: 08/03/2014 Posts: 2,970 Points: 8,502 Location: united kingdom
|
I'm sure we've all done similar things (sometimes even things which are too late to correct(yes I've been there)) I'm sure you will manage to sort it out( do you really have to remove all the planking just to put the waterways in) Ken's the name modeling's the game.
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Hi Ken. I am taking all the planking off because I couldn't find any basswood strips to match, so I have bought Lime strips! The nearest colour that I could find. but to avoid difference in matching I think it will be better to do the whole lot again. "with more care" Martin.
ps. I forgot to say that I would need to trim off all of the planks individually at the bow but not sure by how much until the waterways are in place. Martin
|
|
Rank: Super-Elite Groups: Registered
Joined: 08/03/2014 Posts: 2,970 Points: 8,502 Location: united kingdom
|
Cornwall model boats do a whole range of wood (including basswood) I know it's a bit late now you've bought it, but mention it for future reference. Ken's the name modeling's the game.
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Thanks for that Ken. kind regards Martin.
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Hi Everyone. I have at last started again, I cleared all the decking that I did and started again have done the stern bulkhead and put the waterways on. I have opted to put them onto the edge of the deck and later I am going to add a piece of 2x2mm batten rounded off along both sides at deck level.Martin OldMart attached the following image(s):
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
sorry missed the stern bulkhead out.Martin OldMart attached the following image(s):
|
|
Rank: Super-Elite Groups: Registered
Joined: 31/05/2010 Posts: 5,679 Points: 17,011 Location: Wiltshire
|
Very nicely done Martin. Tony Happy Modelling
BUILDING: Hachette Spitfire Mk 1A, Constructo Mayflower SUBSCRIPTION COMPLETE (Awaiting building): USS Constitution, Sovereign of the Seas, 1:200 Bismarck (Hachette) COMPLETED: Porsche 911, E-Type Jaguar, Lam Countach
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Thanks Tony. I could get some decking done but will have to wait until Monday. I have invested in a guillotine for better and more precise cutting but it isn't coming till then, still I can always go digging down at the allotment and get cold and wet lol. Martin.
|
|
|
Making lovely progress Martin, very well done.... Regards Alan
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Thanks' Alan, I'm hoping to finish the main deck this week, after a lot of fussing about! anyway I am getting there slowly, will post pics when done. Martin .
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
Right. deck finally done hope it looks ok with you guys? I can finally get on with the hull, hope that doesn't take me as long.
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
sorry I don't know what has gone wrong with the photos? I did resize them Martin
|
|
Rank: Administration Groups: Registered, Forum Support Team, Administrators, Global Forum Support Team, Moderator, Official Builds Joined: 09/11/2012 Posts: 8,276 Points: 23,916 Location: East midlands
|
OldMart wrote:sorry I don't know what has gone wrong with the photos? I did resize them Martin Your picture data is showing they are 2880 pixels width and they need to be 650 max. Regards delboy271155 (Derek) COME BACK GUY FAWKES "YOUR COUNTRY NEEDS YOU"
|
|
Rank: Amateur level 2 Groups: Registered
Joined: 06/12/2019 Posts: 49 Points: 164 Location: Macclesfield UK
|
hope this is better? OldMart attached the following image(s):
|
|
Guest
|