|
|
 Rank: Super-Elite        Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
After a break from this one, I'm back on it again. The next task is to check final main body placing and get the door fit correct. Then I need to sort door hinges, door final fit and paint. Then finish the interior, install the dash and steering wheel, then fix the body in place. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
Getting on with this one now as well as the Gunston Lola T70. Doors now trimmed and sorted to fit. Umpteen coats of primer, sanding, and three top coats. The doors fit really well - just taped in place for the pics but the body is only loosely dropped over the tub. Time to finish the interior, fix the hinges, then add the body to the main floor. On we go from there. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
A small update on this one. When finished, the doors will work so the interior can be seen. I've added a matt black head lining which looks far better than the shiny clear plastic that was there before. Dashboard in next, then the hinge assemblies for the doors. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
Ok, dashboard now in. Steering column next, but not the wheel - yet.  roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
I've managed to modify the kit door hinges and front panels and they are now in the shell. Steering column and wheel added, gear and brake levers, and body placed for a rough idea of fit. Looking aok so far. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
I've now added a roll cage which was made from a old guitar lead with the core pulled out, and thick copper wire pushed in. I'm in the process of hanging the door skins and after that, the body will be added to the floor... roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
The body is now fixed to the floor section. Some cleaning up and touching up to do but so far so good - and the doors work. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
Moving ahead with more of the body. Rear wheel arch liners are now made and fitted. Painted matt black. Also, the side windows have been made and are also now in place. Door liner cards next and then it will be getting on with the front suspension and engine. roymattblack attached the following image(s):
|
|
|
|
|
Looking good Roy.  Do you make the wheels too, or buy them in? Mark
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
Hello Mark. I'll make my own wheels as on my previous E Type race car builds. roymattblack attached the following image(s):
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
I've been bashing along on this one for the past few weeks and the engine is now pretty much built and fitted to the car. Lots more detail bits and wiring to add, as well as making all the other gubbins that goes around the engine. On we go.  roymattblack attached the following image(s):
|
|
|
|
|
Looking good Roy. It is amazing, given how big this engine was, that you could lift the bonnet up and work on pretty much anything to do with the engine, whereas you don’t stand a chance with modern cars. I had a TR4a with a 2.2L engine and you could virtually get inside with it. 
|
|
|
 Rank: Master   Groups: Registered
Joined: 25/11/2018 Posts: 1,284 Points: 3,878 Location: Southeast UK
|
Lovely work as always Roy, looking forward to seeing more.
Well done!  
Kev
Per Ardua Ad Astra
|
|
|
Rank: Super-Elite Groups: Official Builds, Administrators, Moderator, Global Forum Support, Registered Joined: 04/06/2011 Posts: 4,392 Points: 13,333 Location: ipswich
|
A long overdue bit of work on this one. It's been sidelined a bit due to impending house move. Anyway, screen rubbers now added...  roymattblack attached the following image(s):
|
|
|
 Rank: Vice-Master Groups: Registered
Joined: 05/04/2016 Posts: 707 Points: 2,124 Location: Ferrara
|
This is an outstanding work, and really a beatiful E-Type. My personal best E-Type body concept Collection active: Lotus 97T, Audi Quattro A2, Vw Maggiolino '60
Work in progress: Porsche 911 RS Turbo
Completed model: Delta WRC Martini, Mclaren MP4/4, Golf GTI 1/8 Tuned
|
|
|
|
Guest (3)
|
UK
