Welcome Guest Search | Active Topics | Log In | Register

Batmobile Official Build Pack 7 Options
Markwarren
#1 Posted : 30 August 2024 22:10:22

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,500
Points: 19,817
Location: Northamptonshire, England
Issue 27

Picture 1 shows the parts for this issue.

Assembling and Fitting the Frame

Take the right middle frame (27A) and attach it to the left rear frame (27B) using 2 x CM screws, picture 2.

Take the assembly and secure it to the front chassis and rear crossmember using 2 x CM screws as shown in pictures 3 and 4.

Pictures 5 shows the complete assembly for this issue.

Markwarren attached the following image(s):
27 (1).jpg
27 (2).jpg
27 (3).jpg
27 (4).jpg
27 (5).jpg
Markwarren
#2 Posted : 01 September 2024 19:13:48

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,500
Points: 19,817
Location: Northamptonshire, England
Issue 28

Picture 1 shows the parts for this issue.

Assembling the Crossmembers

Take the central crossmember, (28A) and secure it with 2 x CM screws as shown in picture 2.

Take the rear crossmember, (28B) and again secure it with 2 x CM screws, picture 3.

Pictures 4 shows the complete assembly for this issue.

Markwarren attached the following image(s):
28 (1).jpg
28 (2).jpg
28 (3).jpg
28 (4).jpg
Markwarren
#3 Posted : 02 September 2024 20:24:32

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,500
Points: 19,817
Location: Northamptonshire, England
Issue 29

Picture 1 shows the parts for this issue.

Assembling the Rear Mount

Take the two shock absorbers, (29B) and the rear mount, (29A) and secure the shock absorbers to the mount with EM screws, picture 2.

Take the assembly and secure it to the rear frame using 2 x CM screws as shown in picture 3.

Pictures 4 shows the complete assembly for this issue.
Markwarren attached the following image(s):
29 (1).jpg
29 (2).jpg
29 (3).jpg
29 (4).jpg
Markwarren
#4 Posted : 03 September 2024 20:38:30

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,500
Points: 19,817
Location: Northamptonshire, England
Issue 30

Picture 1 shows the parts for this issue.

Assembling the Spider Joint

Insert the spider joint (30D) between the two flanges at the end of the slip yoke, (30C) and secure each side with an AP screw, picture 2.

Take the assembly and place it into the recess at the end of the rear axle housing, (30B) pictures 3 and 4.

Pictures 5 shows the complete assembly for this issue.
Markwarren attached the following image(s):
30 (1).jpg
30 (2).jpg
30 (3).jpg
30 (4).jpg
30 (5).jpg
Markwarren
#5 Posted : 05 September 2024 20:36:25

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,500
Points: 19,817
Location: Northamptonshire, England
Issue 31

Picture 1 shows the parts for this issue.

Assembling the Rear Axle

Place the rear axle side (31A) onto the rear axle (30A) and secure it with 2 x AM Screws, pictures 2 and 3.
Next, secure the rear axle housing to the rear axle with 2 x AP Screws. Please note with way round the rear axle housing is fitted as shown in picture 4.

Finally attach the back axle cover (31B) in place by push fitting it on securely, picture 5. Note: Make sure you are happy with the fit of the axle assembly, I have taken a different view of the orientation of this part as shown in picture 6, as once this part is in place it will cover the screws.

Pictures 7 shows the complete assembly for this issue.
Markwarren attached the following image(s):
31 (1).jpg
31 (2).jpg
31 (3).jpg
31 (4).jpg
31 (5).jpg
31 (6).jpg
31 (7).jpg
Markwarren
#6 Posted : 08 September 2024 12:37:27

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionOutstanding Build: An award for an outstanding buildBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered, Administrators, Global Forum Support, Moderator, Forum Support Team, Official Builds

Joined: 04/01/2016
Posts: 6,500
Points: 19,817
Location: Northamptonshire, England
Issue 32

Picture 1 shows the parts for this issue.

Assembling the Leaf Spring

Place the left rear leaf spring (32A) onto the post on the rear axle. Note that the longer end of the leaf spring runs towards the back as shown in picture 2. Place the shock absorber mount over the leaf spring and secure with an EM screw, picture 3.

Push the ends of the ā€œUā€ bolts (32C) through the holes of the mount and secure them with the small nuts (32D) using the supplied tool, (32F) pictures 4, 5 and 6.

Using an EM screw, secure the shock absorber (32E) to the notch on the side of the mount as shown in picture 7.

Pictures 8 shows the complete assembly for this issue.

The final picture 9, shows the complete assembly for this pack.


Markwarren attached the following image(s):
32 (1).jpg
32 (2).jpg
32 (3).jpg
32 (4).jpg
32 (5).jpg
32 (6).jpg
32 (7).jpg
32 (8).jpg
32 (9).jpg
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.224 seconds.
DeAgostini