Welcome Guest Search | Active Topics | Log In | Register

Tiger Drive System To Start Nitro Engine Options
hawkboy000
#1 Posted : 09 April 2017 05:04:25

Rank: Newbie


Groups: Registered

Joined: 22/08/2016
Posts: 2
Points: 9
Location: Canada
Hey guys,

I have successfully got a Tiger Drive rotor start to fit onto the kyosho gx21 engine.

It required some modification of the mounting bracket for the engine. I needed to widen the mounting holes in order to allow the motor to move slightly closer to the front of the chassis giving more room for the exhaust muffler. I also needed to craft a 2-3mm thick aluminum plate in between the exhaust port and the exhaust manifold (acts as a spacer) due to the fact that the rotor start is a bit bigger than the pullcord.This also meaned that I needed to file the exact size hole for the exhaust gas to flow through and also drill 2 small holes to allow the exhaust manifold bolts to pass through.

Since the output shaft on the kyosho engine is about 8mm thick, I got the *s681 90 degree drive system*BigGrin

http://sullivanproducts.com/tiger-drive/

Essentially there are 2 gears. 1 that contains a 1way bearing attached to the crank output (recommend to apply a good amount of grease) and another gear at a 90 degree angle (see picture)


Once that was done, I sealed the spacer with high temp silicone (works so much better than the gasket that was originally provided in the model space kit).

I also added a bit of grease in the rotor start gears and siliconed everything together. The tiger drive system has an aluminum plate and a plastic cover that goes over the gear. I had to file down the aluminum plate in order to reduce the size of the entire thing.

The kit should come with a hex bit that has a ball shaped end which allow you to have the bit at a angle when starting. I simply hook up my cordless drill on the end and give her a few taps on the trigger.
hawkboy000 attached the following image(s):
20160713_121651_HDR-600x1067.jpg
20160821_204241-600x1067.jpg
Screenshot_2017-04-09-00-55-39-600x709.png
birdaj2
#2 Posted : 09 April 2017 10:01:53

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 31/05/2010
Posts: 5,653
Points: 16,933
Location: Wiltshire
Really interesting detail.

These rc kits look really technical but interesting all the same.
Happy Modelling

BUILDING: Hachette Spitfire Mk 1A, Constructo Mayflower
COLLECTING 1:200 Bismarck (Hachette)all parts now complete just needs building.
SUBSCRIPTION COMPLETE (Awaiting building): USS Constitution, Sovereign of the Seas
COMPLETED: Porsche 911, E-Type Jaguar, Lam Countach
Chasecar
#3 Posted : 21 April 2017 22:19:21

Rank: Pro

Build-Diary Medal: Build-Diary Medal of Honour
Groups: Registered

Joined: 23/07/2013
Posts: 120
Points: 336
Location: Brisbane Australia
I'm liking the look of this will need to check it out
Chasecar
Tomick
#4 Posted : 21 April 2017 22:49:42

Rank: Pro

Groups:

Joined: 24/08/2009
Posts: 48,020
Points: -13,298
Interesting mod, though it does invalidate engine warranty and users should be aware that a roto-start can easily damage engine internals if not carefully used as they can be quite brutal.
hawkboy000
#5 Posted : 23 April 2017 16:55:01

Rank: Newbie


Groups: Registered

Joined: 22/08/2016
Posts: 2
Points: 9
Location: Canada
I'm aware. I've set my 12v cordless drill to a setting where it will stop turning if the engine begins to hydrolock or becomes hard to turn.
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.102 seconds.
DeAgostini