Welcome Guest Search | Active Topics | Log In | Register

SanFrancisco please help Options
Flexi
#1 Posted : 14 June 2017 11:58:20

Rank: Beginner Level 1

Groups: Registered

Joined: 14/12/2014
Posts: 7
Points: 11
Location: Nottingham
Hello All,
Just started the SanFracisco after many months of thinking about it. I wonder if anyone can help me? The edgeing around the decks in mahogany states 5mm but no thickness is given as is the clinker on the bulkheads again shows 5mm but no thickness can anyone clarify
Thanks in advance
greyhawk
#2 Posted : 14 June 2017 13:02:22

Rank: Master

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 19/05/2015
Posts: 1,419
Points: 4,272
Location: Darmstadt, Germany
I assume you refer to Phase 6 "Lining the decks" and the mahogany strips to be put along the edges designated as "deck bratticing strips 25" and "foredeck edging strips 26" respectively.

If so you can find the specific material sizes in your parts list in the pack 1 guide.

25 corresponds to 0.6x5x500 mm mahogany strips

26 corresponds to 1.5x3x500 mm mahogany strips
birdaj2
#3 Posted : 14 June 2017 13:02:55

Rank: Super-Elite

Publisher Medal: Featured Build of the MonthActive Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsTurquoise Medal: Turquoise Medal for model making know-how contributionBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 31/05/2010
Posts: 5,679
Points: 17,011
Location: Wiltshire
Flexi wrote:
Hello All,
Just started the SanFracisco after many months of thinking about it. I wonder if anyone can help me? The edgeing around the decks in mahogany states 5mm but no thickness is given as is the clinker on the bulkheads again shows 5mm but no thickness can anyone clarify
Thanks in advance


Just been looking at the instructions. If its instruction 7 lining the bulkheads and upper stern it says use strips 27. These are on the parts list as bulkhead lining x 7 pieces 0.6x5x500 mm mahogany.

Does this help you?
Happy Modelling

BUILDING: Hachette Spitfire Mk 1A, Constructo Mayflower
SUBSCRIPTION COMPLETE (Awaiting building): USS Constitution, Sovereign of the Seas, 1:200 Bismarck (Hachette)
COMPLETED: Porsche 911, E-Type Jaguar, Lam Countach
Flexi
#4 Posted : 14 June 2017 13:22:03

Rank: Beginner Level 1

Groups: Registered

Joined: 14/12/2014
Posts: 7
Points: 11
Location: Nottingham
Thank you all for taking the time to help, it's very much apprehended. I purchased the kit in monthly parts and on any of the instructions I downloaded nothing shows the thickness of parts. Again thank you
greyhawk
#5 Posted : 14 June 2017 13:30:30

Rank: Master

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 19/05/2015
Posts: 1,419
Points: 4,272
Location: Darmstadt, Germany
Flexi
#6 Posted : 14 June 2017 15:37:09

Rank: Beginner Level 1

Groups: Registered

Joined: 14/12/2014
Posts: 7
Points: 11
Location: Nottingham
Thanks, found it and do I feel an idiot! Sorry for wasting your time.Confused Confused Confused Confused
greyhawk
#7 Posted : 14 June 2017 15:39:59

Rank: Master

Active Service Medal: 500 post active service MedalPurple Medal: Super active service medal for 1000 postsBuild-Diary Medal: Build-Diary Medal of HonourRed Medal: Red Medal
Groups: Registered

Joined: 19/05/2015
Posts: 1,419
Points: 4,272
Location: Darmstadt, Germany
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 0.168 seconds.
DeAgostini